MIDDLE ATLANTIC RACKS
These racks have been introduced to the StudioRacks range for clients who are looking for attractive enclosed racking but need a rack quick. Available in Oak style wood grain laminate and Black woodgrain laminate.
All racks on this page are shipped flat.

Single Rack Delivery price £15

       
OAK LAMINATE STYLE RACKS    

The OBRK range of 19" racks have a high-quality Oak style woodgrain laminate finish. They are stocked and available in 3 sizes, 12u, 16u, and 20u each being 460mm (18") deep.
Supplied pre fixed with front mounted rack strips, pre tapped to receive 10/32 rack screws.(No cage nuts required). Rack screws available separately at very favourable rate when purchased with the racks.

They are shipped flat and easily assembled requiring only a screw driver.The fixings are not visable on the outer face.

These racks are pre drilled for the optional rear mounted rack strips. Uses
A tempered grey smoked glass door is also available for all sizes. When using with a door the front rack strips can be moved back to provide the necessary clearance.
Castor sets also available.

 

 

 

12U

£125

 

16U

£140

 

20U

£150

 

     
         
BLACK WOODGRAIN EFFECT RACKS  

With a high quality and hardwearing black woodgrain effect laminate, the Middle Atlantic BRK range is stocked in the same sizes as the oak laminate range. 460mm (18") deep, 525mm wide.
Supplied pre fixed with front mounted rack strips, pre tapped to receive 10/32 rack screws.(No cage nuts required). Rack screws available separatley at a low rate when purchased with the racks.

These racks are pre drilled for the optional rear mounted rack strips.
Shipped flat. Tool for assempling included.
A tempered grey smoked glass door is also available as an option for all sizes. When using with a door, the front rack strips can be moved back to provide the necessary clearance.
Castor sets also available.

8U £92
12U £99
16U £120
20U £135

 
 
         
OAK LAMINATE ANGLE RACK 16U  

Like the OSBR racks above the OSR rack is built from high quality Oak style laminate finish. Stocked in the 16u size the rack has an angled face reducing from 580mm at the base to 492mm at the top. Fitted with front rails.
Rack strips, are pre tapped to receive 10/32 rack screws.(No cage nuts required).
Castors included.
Rack screws available separatley at low rate when purchased with the racks. See below.

Shipped flat and easily assembled requiring only a screw driver.

Also made in a 24U size. Please ask about availability and price.

16U

£185

 

     
     
     
 
 
         
RACK SCREWS
for the mounting of equipment into the pre tapped rack strps. These scres are suitable for the racks on this page. 10/32" x 19mm long.
32no.

£3

 

48no.

£4

 

60no.

£5

 

 
         
         
Information        
As well as products shown below Middle Atlantic Enclosures have a huge range of racking and accessories. Further info available at www.middleatlantic.com
         
The standard size for 1u is 19" x 1.75" /482.6mm x 44.4mm. A "U" is the size adopted by the manufacturers for outboard hardware equipment like compressors, noise gates, effects processors and a whole host of electrical equipment throughout a multitude of industries world wide.
         
email studioracks@btinternet.com